5 products
5 products
Nukeproof Mega 290 Factory 2022
Regular price £5,399.00
Tax included.
For over 10 years, The best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With 4 Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. However, we never rest on our laurels and 2021 sees the introduction of the 4th generation Mega.
Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of our riders and customers alike.
To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The new carbon swingarms helps reduce the unsprung weight on the rear of the bike. Again, the Mega is available in both 27.5” or 29” wheel sizes, with both frame designs tailored around each wheel size. All forged part are also made from 6061-T6 Aluminium
After winning 4 Enduro World Series Titles in 3 years the all new design is an evolution of our ultimate Enduro bike. At the heart of the frame is all new suspension Kinematics, designed to be more subtle off the top, whilst remaining progressive and predictable . Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include:
- All New Carbon chassis
- Designed and improved suspension kinematics
- Tube In Tube design for easy cable installation
- All new Geometry
- Optimised sizing/fit - Small to XXL
- SRAM UDH
- Now fits a 750ml water bottle inside the main front triangle!
The new Mega frame is optimised around the rider and weight distribution. The new geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required.
Please Note: Due to severe delays in the bicycle supply chain, we have been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result the specification may differ from those shown in the images. Please refer to the specification table for accurate information.
FEATURES
- Enduro Bike
- Nukeproof T700/800 UD woven Carbon Fibre frame
- 160mm Rear travel
- Comes with 3D Contored rubber protection and clear paint protection kits
- Boost 148 Hub Spacing
- Sizes Available: Small, Medium, Large, Extra Large, XXL
|
FACTORY |
|
|
FRAME |
Nukeproof Mega V4 290 Carbon, 160mm Travel, ultra-strong monocoque UD Carbon Fibre frame, internally piped cable routing, ISCG 05 mounts, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection and Factory fitted clear paint protection kit covering TT/DT/CS/SS. |
|
FORK |
Fox 38 Float, Factory Series, Kashima, Grip 2 Damper, 170mm, 44mm Offset, BOOST, Orange |
|
SHOCK |
Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom LCM LRM tune, 230x62.5mm, Bearing End, 2x 0.3 spacer fitted. |
|
FRONT WHEEL |
DT Swiss EX1700 SPLINE 30,29", 6 Bolt, 110x15mm |
|
REAR WHEEL |
DT Swiss EX1700 SPLINE 30, 29", 6 Bolt, Shimano Microspline Driver, 148x12mm |
|
TYRES |
Front: Maxxis Assegai 29" x 2.5 WT, 3C MaxxGrip DD TR, Rear: Maxxis Minion DHR II 29” x 2.4 WT, 3C MaxxTerra DD TR |
|
CRANKSET |
Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 32T, 52mm Chainline |
|
SHIFTER |
Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV |
|
REAR DERAILEUR |
Shimano XT M8100, SGS 12-Speed, Shadow Plus |
|
CHAIN |
Shimano XT M8100 HG 12-speed Inc Quicklink |
|
CASSETTE |
Shimano Deore M6100 12-Speed (HYPERGLIDE+), 10-51T |
|
CHAIN GUIDE |
Nukeproof Guide with Bash, 28-36T, ISCG-05, black |
|
BRAKES |
Shimano XT M8120, 4 Pot Brake, Metallic Pads |
|
FRONT ROTOR |
203mm |
|
REAR ROTOR |
203mm |
|
HANDLEBARS |
Nukeproof Horizon V2 25mm Rise, Width - M780mm, L800mm, XL800mm, XXL800mm |
|
STEM |
Nukeproof Horizon, 45mm, Black |
|
SADDLE |
Nukeproof |
|
SEATPOST |
Bikeyoke Divine Stealth with Brand-X lever, M:160mm drop; L/XL/XXL:185mm drop |
|
HEADSET |
Nukeproof, 44-56 IITS |
|
GRIPS |
Nukeproof Sam Hill Signature |
|
BEARINGS |
Enduro Bearings |
|
WEIGHT(SIZE MEDIUM) |
15.5Kg (Tubeless) |
Nukeproof Mega 290 Pro 2022
Regular price £3,699.99
Tax included.
Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of our riders and customers alike.
To optimise the strength and weight, the Mega is contructed fully out of T6061-T6 Aluminium including all forged part.
After winning 4 Enduro World Series Titles in 3 years the all new design is an evolution of our ultimate Enduro bike. At the heart of the frame is all new suspension Kinematics, designed to be more subtle off the top, whilst remaining progressive and predictable . Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include:
- All New Aluminium chassis
- Designed and improved suspension kinematics
- Tube In Tube design for easy cable installation
- All new Geometry
- Optimised sizing/fit - Small to XXL
- Sram UDH
- Now fits a 750ml water bottle inside the main front triangle!
The new Mega frame is optimised around the rider and weight distribution. The new geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required.
Please Note: Due to severe delays in the bicycle supply chain, we have been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result the specification may differ from those shown in the images. Please refer to the specification table for accurate information.
FEATURES:
- Enduro Bike
- Hydroformed 6061-T6 Triple-Butted Aluminium
- 160mm Rear travel
- Comes with 3D Contored rubber protection
- 148mm Boost Hub Spacing
- Sizes Available: Small, Medium, Large, Extra Large, XXL
|
FRAME |
Nukeproof Mega V4 290 Alloy, 160mm Travel, custom triple butted hydro-formed tube set, internal cable routing, ISCG 05 mount, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection |
|
FORK |
RockShox ZEB Select + Charger 2.1 RC 170mm, 44mm Offset, BOOST, Debonair, Gloss Black |
|
SHOCK |
RockShox Super Deluxe Select+ RT, Custom LIN L1 HOTDOG S320 tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted |
|
FRONT WHEEL |
Nukeproof Neutron V2 29", Tubeless Ready, 32h, 110x15mm |
|
REAR WHEEL |
Nukeproof Neutron V2 29", Tubeless Ready, 32h, SRAM XD Driver with 36 points of engagement, 148x12mm |
|
TYRES |
Front: Maxxis Assegai 29" x 2.5 WT, 3C MaxxGrip DD TR, Rear: Maxxis Minion DHR II 29” x 2.4 WT, 3C MaxxTerra DD TR |
|
CRANKSET |
SRAM Descendant 7K Eagle 12-Speed, 170mm, 30T, B148, DUB |
|
SHIFTER |
SRAM GX Eagle 12-Speed |
|
REAR DERAILEUR |
SRAM GX Eagle 12-Speed |
|
CHAIN |
SRAM GX Eagle 12-Speed |
|
CASSETTE |
SRAM GX Eagle 12-Speed, CS XG1275 EAGLE 10-52T |
|
CHAIN GUIDE |
Nukeproof Guide, 28-36T, ISCG-05, black |
|
BRAKES |
SRAM Guide RE, Sintered Pads |
|
FRONT ROTOR |
SRAM Centreline, 200mm |
|
REAR ROTOR |
SRAM Centreline, 200mm |
|
HANDLEBARS |
Nukeproof Horizon V2 25mm Rise, Width - M780mm, L800mm, XL800mm, XXL800mm |
|
STEM |
Nukeproof Neutron AM, 45mm, black |
|
SADDLE |
Nukeproof Horizon Enduro, Black |
|
SEATPOST |
Brand X Ascend internal, 31.6mm, M:150mm drop; L:170mm drop; XL/XXL:200mm |
|
HEADSET |
Nukeproof, 44-56 IITS |
|
GRIPS |
Nukeproof Sam Hill Signature |
|
BEARINGS |
Enduro Bearings |
|
WEIGHT(SIZE MEDIUM) |
15.52Kg (Tubeless) |
| SMALL | MEDIUM | LARGE | X-LARGE | ||
|---|---|---|---|---|---|
| (A) REACH | 430 | 455 | 475 | 495 | 515 |
| (B) STACK | 621.16 | 621.16 | 639.22 | 648.24 | 657.27 |
| (C) EFFECTIVE TOP TUBE LENGTH | 567.7 | 592.71 | 610.87 | 632.79 | 654.71 |
| (D) SEATTUBE LENGTH | 380 | 410 | 440 | 470 | 500 |
| (E) EFFECTIVE SEATTUBE ANGLE | 77.5° | 77.5° | 78° | 78° | 78° |
| (F) SEATTUBE ANGLE (ACTUAL) | 71° | 71° | 71.5° | 71.5° | 71.5° |
| (G) SADDLE HEIGHT AT SADDLE OFFSET | 650 | 700 | 750 | 800 | 850 |
| (H) SADDLE OFFSET AT SADDLE HEIGHT | 142.22 | 158.59 | 166.66 | 181.58 | 196.49 |
| (I) HEADTUBE LENGTH | 100 | 100 | 120 | 130 | 140 |
| (J) HEADTUBE ANGLE | 64° | 64° | 64° | 64° | 64° |
| (K) CHAINSTAY LENGTH | 440 | 440 | 440 | 440 | 440 |
| (L) FRONT CENTRE | 758.5 | 783.5 | 812.11 | 836.42 | 860.72 |
| (M) WHEELBASE | 1197.48 | 1222.48 | 1251.09 | 1275.39 | 1299.7 |
| (N) BOTTOM BRACKET DROP | 30 | 30 | 30 | 30 | 30 |
| (O) BOTTOM BRACKET HEIGHT | 345 | 345 | 345 | 345 | 345 |
| (P) STAND OVER HEIGHT | 721.75 | 720.28 | 721.3 | 720.73 | 726.77 |
| (Q) FORK TRAVEL | 170 | 170 | 170 | 170 | 170 |
| (R) TRAIL | 132.33 | 132.33 | 132.33 | 132.33 | 132.33 |
| (S) FORK OFFSET | 42 | 42 | 42 | 42 | 42 |
| (T) AXLE TO CROWN | 582 | 582 | 582 | 582 | 582 |
| (U) MAXIMUM SEATPOST INSERT | 216 | 245 | 270 | 301 | 330 |
Nukeproof Mega MX 297 X01
Regular price £5,999.00
Tax included.
For over 10 years, our best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With 4 Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. However, we never rest on our laurels and 2021 sees the introduction of the 4th generation Mega, now in a 297 offering.
Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of our riders and customers alike. This has resulted in the launch of the Mega 297.
The pursuit for performance is endless. Developed in conjunction with our elite athletes, the Mega is now available in a mixed (MX) wheel size platform. The Mega 297 is a seriously capable machine, paring a 29” wheel up front with a 27.5” wheel out back. Why two sized wheels? The 29” wheel up front to maximise grip and rolling efficiency whilst the 27.5” wheel out back, ensures nimble handling for manoeuvrability and extra clearance for riders when leaning off the back of the bike.
To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The new carbon swingarms helps reduce the unsprung weight on the rear of the bike. All forged part are made from 6061-T6 Aluminium.
After winning 4 Enduro World Series Titles in 3 years the all new design is an evolution of our ultimate Enduro bike. At the heart of the frame is all new suspension Kinematics, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include:
- Front 29”/Rear 27.5” MX wheel size platform
- Improved suspension kinematics
- Tube-In-Tube design for easy cable installation
- All new Geometry
- SRAM UDH
- Room for a 750ml water bottle inside the main front triangle
The new Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through seat angle which are bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.
FEATURES
- Enduro Bike
- Nukeproof T700/800 UD woven Carbon Fibre frame
- 165mm Rear travel
- Comes with 3D Contored rubber protection and clear paint protection kits
- Boost 148 Hub Spacing
- Sizes Available: Small, Medium, Large
FULL SPECS
| MEGA 297 MX | MEGA 297C FRAME ONLY | |
|---|---|---|
| FRAME | Ultra Strong T700/800 Monocoque Carbon Fibre | Ultra Strong T700/800 Monocoque Carbon Fibre |
| FORK | Fox 38 Float, Factory Series, Kashima, Grip 2 Damper, 170mm, 44mm Offset, BOOST, Black (SHORT ID: D33L) | |
| SHOCK | Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x62.5mm, Bearing End, 2x 0.3 spacer fitted. (SHORT ID: D7JJ) | Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x62.5mm, Bearing End, 2x 0.3 spacer fitted. (SHORT ID: D7JJ) |
| FRONT WHEEL | Nukeproof Horizon V2 29", 6 Bolt, 110x15mm | |
| REAR WHEEL | Nukeproof Horizon V2 27.5", 6 Bolt, Shimano XD Driver, 148x12mm | |
| TYRES | Front: Maxxis Assegai 3C MAXXGRIP/DD/TR 29” x 2.5WT, Rear: Maxxis Minion DHR II 3C MAXXTERRA/DD/TR 27.5” x 2.4WT | |
| CRANKSET | SRAM Descendant Carbon Eagle 12-Speed, 170mm, 32T, B148, DUB | |
| SHIFTER | SRAM XO1 Eagle 12-Speed, Black | |
| REAR DERAILEUR | SRAM XO1 Eagle 12-Speed, Black | |
| CHAIN | SRAM GX Eagle 12-Speed | |
| CASSETTE | SRAM XO1 Eagle 12-Speed, CS XG1295 EAGLE 10-52T | |
| CHAIN GUIDE | Nukeproof Guide with Bash, 28-36T, ISCG-05, black | |
| BRAKES | SRAM Code RSC, Sintered pads | |
| FRONT ROTOR | SRAM Centreline, 200mm | |
| REAR ROTOR | SRAM Centreline, 200mm | |
| HANDLEBARS | Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm) | |
| STEM | Nukeproof Horizon, 50mm, Black | |
| SADDLE | Nukeproof, Black | |
| SEATPOST | RockShox Reverb Stealth with 1x Remote, 31.6mm; S: 346mm length, 125mm drop; M: 409mm length, 150mm drop; L: 462mm length, 175mm drop. | |
| HEADSET | Nukeproof, 44-56 IITS | Nukeproof, 44-56 IITS |
| GRIPS | Nukeproof Sam Hill Signature | |
| BEARINGS | ||
| WEIGHT: (SIZE MEDIUM) | 15.53Kgs/34.23lbs (Tubeless) | 3.82Kgs/8.4lbs (Medium) |
| SMALL | MEDIUM | LARGE | |
|---|---|---|---|
| (A) REACH | 430 | 455 | 475 |
| (B) STACK | 621.16 | 621.16 | 639.22 |
| (C) EFFECTIVE TOP TUBE LENGTH | 567.71 | 592.71 | 610.87 |
| (D) SEATTUBE LENGTH | 380 | 410 | 440 |
| (E) EFFECTIVE SEATTUBE ANGLE | 77.5° | 77.5° | 78° |
| (F) SEATTUBE ANGLE (ACTUAL) | 71° | 71° | 71.5° |
| (G) SADDLE HEIGHT AT SADDLE OFFSET | 650 | 700 | 750 |
| (H) SADDLE OFFSET AT SADDLE HEIGHT | 142.22 | 158.59 | 166.66 |
| (I) HEADTUBE LENGTH | 100 | 100 | 120 |
| (J) HEADTUBE ANGLE | 64° | 64° | 64° |
| (K) CHAINSTAY LENGTH | 435 | 435 | 435 |
| (L) FRONT CENTRE | 758.5 | 783.5 | 812.11 |
| (M) WHEELBASE | 1192.48 | 1217.48 | 1246.09 |
| (N) BOTTOM BRACKET DROP | 30/10 | 30/10 | 30/10 |
| (O) BOTTOM BRACKET HEIGHT | 345 | 345 | 345 |
| (P) STAND OVER HEIGHT | 721.75/725.16 | 720.28/724.41 | 721.3/722.92 |
| (Q) FORK TRAVEL | 170 | 170 | 170 |
| (R) TRAIL | 132.33 | 132.33 | 132.33 |
| (S) FORK OFFSET | 42 | 42 | 42 |
| (T) AXLE TO CROWN | 584 | 584 | 584 |
| (U) MAXIMUM SEATPOST INSERT | 216/250mm | 245/250mm | 270/255mm |
*All dimensions in mm unless otherwise stated
- Frame Spec
| Material: | Ultra Strong T700/800 Monocoque Carbon Fibre |
|---|---|
| Fork Travel: | 170mm |
| Axle to Crown: | 584mm |
| Fork Offset: | 44mm |
| Rear Travel: | 165mm |
| Wheels Size: | 29" Front / 27.5" Rear |
| Max Tyre Size: | 2.6" |
| Recommended Shock Sag (Measured seated): | 30-35% |
| Shock Size: | 230x62.5mm |
| Shock Hardware F: | 25x8mm |
| Shock Hardware R: | 30x8mm |
| Sizing: | S/M/L |
| Headtube: | 44-56mm Tapered Semi-Integrated |
| Headset: | ZS44-28.6 - T2 / ZS56/40 - B8 |
| Bearings Required: | 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA |
| Seatpost: | 31.6mm (Internal Routing for Dropper Seatpost) |
| Seat Clamp: | 36.4mm |
| BB: | Threaded 73mm BSA |
| Rear Hub: | Boost 148x12mm |
| Rear Axle: | SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) |
| Chain Guide: | ISCG05 |
| Brake Mount: | 180mm Direct Post |
| Protection: | 3D Contoured Rubber Frame Protection for DT/SS/CS |
